![](images/blank.gif)
IZ0JOJ Antonio
Posts: 1
Joined: Apr 30, 2007
![](../Graphics/Thumbnails/QF1XJP0Z1XJ42A4242DP0Z.jpg)
|
Posted: Sep 8, 2011 02:53 PM
![Reply To Post](images/icon_reply_topic.gif)
Msg. 1 of 4
Even if i always considerated my person as very clever, i didn't understand how to send a eqsl card to a callsign.
COULD U HELP ME?
thanks
IZ0JOJ Antonio
|
![](images/blank.gif)
N1ORK Orest Andy Zajac
Posts: 942
Joined: Sep 7, 2006
QRZ..QRZ..Any one out there?..Is this thing on??
|
Posted: Sep 8, 2011 08:12 PM
![Reply To Post](images/icon_reply_topic.gif)
Msg. 2 of 4
Antonio, There are two things to consider. Are you using a logging program, or do you want to do it manually? If you use a logging program, you should be able to upload an ADIF file directly to eQSL. If your program doesn't do it automatically, you may have to do it manually. In you OutBox you should find this link 'Upload ADIF Log'. On that page it will give you an option to browse your computer for the proper file to upload. If you want to send only one eQSL manually, look again for a link in your OutBox for 'Manual Log Entry'. This will allow you to input one QSO directly into your OutBox. Once you have done one of these steps, your eQSL card will automatically be sent to the other ham. Also, you should try to get your AG certificate, so that your eQSL will be valid for awards.
Hope this helps. 73 Andy - n1ork
N1ORK Orest 'Andy' Zajac
|
![](images/blank.gif)
IZ7TZV Vincenzo
Posts: 1
Joined: Feb 18, 2012
![](../Graphics/Thumbnails/QF1XJKP01XJ1XKP0271X.jpg)
|
Posted: Feb 18, 2012 11:44 AM
![Reply To Post](images/icon_reply_topic.gif)
Msg. 3 of 4
Please, how can I configure the automating send, by HAM radio de luxe ??? Thank,,
IZ7TZV Vincenzo
|
![](images/blank.gif)
VA3KAB David Bell
Posts: 1056
Joined: Jan 25, 2006
|
Posted: Feb 21, 2012 12:21 PM
![Reply To Post](images/icon_reply_topic.gif)
Msg. 4 of 4
Quote: Please, how can I configure the automating send, by HAM radio de luxe ??? Thank,,
--- Original message by IZ7TZV Vincenzo on Feb 18, 2012 11:44 AM I am running V5.0 here, it's possible they might have changed this slightly for V5.1. In V5.0 go to 'My Logbook'->Configure->eQSL.cc' The screen there will allow you to enter your eqsl username and password, also QTH Nickname if needed. You also have the option to auto upload to eQSL everytime you add a log entry, this is disabled by default. Dave, VA3KAB
|
|
|
|