 |
|
eQSL.cc Home
Search
Login
Authors
Recent Posts| »Forums Index »General Interest Support »Support - English speaking »eQSL Card transparent strip. | 
|
| Author | Topic: eQSL Card transparent strip. (4 messages, Page 1 of 1) |
 2E0ZYF Haz Posts: 1 Joined: Dec 7, 2009  
|
Posted: Jan 21, 2010 02:04 PM
Msg. 1 of 4
Hi.
Can anyone that looks at these forum pages please inform me how I put the comments that go onto the transparent strip on the eQSL card? It states on there. “Comment line 1”. I don't want my comment showing up in the wrong place. Also is there any way that my eQSL can be viewed with all relevant info installed? As a finished article before I finally save. I would also like to know how to move the strip to the top of the card. Finally is there any way to delete the card and start again after saving if not satisfied with the overall outcome? Thank you for your time. Haz.   Derrr2e0zyf Haz |
|
N1UK Mark Robinson Posts: 69 Joined: Dec 16, 2006  |
Posted: Jan 22, 2010 01:00 AM
Msg. 2 of 4
If you add the ADIF qslmsg parameter to your log file then whatever text you put in the qslmsg field will appear on your QSL card in the coments strip.
Mark N1UK N1UK Mark Robinson |
|
N1UK Mark Robinson Posts: 69 Joined: Dec 16, 2006 |
Posted: Jan 22, 2010 01:06 AM
Msg. 3 of 4
Reading your post more closely, I see that you are creating your QSL card. So if you leave the comment field blank at the creation time, you can vary what get puts in that field by adding the QSLMSG field to your uploaded ADIF log book.
When the QSL card details are imported from the log file into your blank QSL card, whatever text is in the QSLMSG field for that particular QSO will be automatically put in the comments line of that outgoing QSL card. Hope this makes it a little clearer Mark N1UK G3ZZM N1UK Mark Robinson |
|
M3ZYF Haz Posts: 5 Joined: Jun 27, 2008 
|
Posted: Jan 22, 2010 02:07 PM
Msg. 4 of 4
Quote: Reading your post more closely, I see that you are creating your QSL card. So if you leave the comment field blank at the creation time, you can vary what get puts in that field by adding the QSLMSG field to your uploaded ADIF log book. Hi Mark N1UK G3ZZM.When the QSL card details are imported from the log file into your blank QSL card, whatever text is in the QSLMSG field for that particular QSO will be automatically put in the comments line of that outgoing QSL card. Hope this makes it a little clearer Mark N1UK G3ZZM --- Original message by N1UK Mark Robinson on Jan 22, 2010 01:06 AM Thank you for your response to my enquiry. Yes fine, you have cleared that point up for me, appreciated. 73's Haz. m3zyf 2e0zyf. M3ZYF Haz Edited by M3ZYF Haz on Jan 22, 2010 at 02:08 PM |
|
|