Joined: |
Jun 17, 2008 01:54 PM |
Last Post: |
Jun 4, 2013 03:03 PM |
Last Visit: |
Jun 5, 2013 02:08 PM |
Website: |
|
Location: |
|
Interests: |
|
|
Send Private Message
|
W5DNT Dan White has contributed to 5 posts out of 11719 total posts
(0.04%) in 5,948 days (0.00 posts per day).
20 Most recent posts:
Dave,
You are absolutely correct. It had not occurred to me to simply disable the auto upload and let ADIF Proc generate a file to be manually uploaded. Wow, I did that and it works great. I had never even noticed that auto upload could be disabled! Now I am a happy camper!
Thanks/73, Dan W5DNT
W5DNT Dan White
Interesting. Wouldn't it be helpful if all the references to ADIF Processor were removed from the eQSL web site, since it is apparently defunct?
Will simply upload partial ADIFs, since I really like my current logging program and will not be switching due to eQSL issue. Just won't do an upload very often as it is now way too cumbersome for routine use. Too bad this was changed!
Thanks for digging out an answer that should have been made readily available to all.
73, Dan W5DNT
W5DNT Dan White
Thanks for the suggestion Dave. I tried logging out, etc. and then using ADIF Processor, but it did the same thing. Shows an error "No such eqsl/password found" for each QSO record. Finally I went in and edited my ADIF to a partial file, for the dates I wanted to upload, and entered it online via foreground upload. That worked, however it is a very cumbersome process compared to what the ADIF Processor used to provide back when it worked for so many years. I would like to get back to that approach, otherwise the manual uploads are just too much effort.
Any help would be appreciated. 73 Dan W5DNT
W5DNT Dan White
Hi Dave,
No, the current upload is not with the ADIF Processor. Since ADIF Processor no longer works right, that is an upload of my whole ADIF as I cannot shorten it without the Processor. When I run processor, say for a 01-01-13 start date, it shows "error user not found" for all QSOs. It had worked properly for years. NOTHING ON MY END CHANGED. Now it doesn't work. A year ago some tech person at eqsl told me they were aware of the problem, as stated in my post.
73 Dan
W5DNT Dan White
For over a year I have experienced problems with the "ADIF Processor", to the point I do not upload much anymore. It comes back "Error No Such User Found" on each QSO. Also, it does not get to 100% and I have to abort the run. About a year ago I emailed support and they replied they were aware of the issue.
My question is has this now been addressed? If so, how.
Thanks/73, Dan W5DNT
W5DNT Dan White
|
|